Link-Pipe Inc.-Manufacturer of No-Dig Pipe Repair Products. ISO 9001-2000 Registered Company
info@linkpipe.com
LINK-PIPE INC. is an engineering company mainly involved in Trenchless Technology products. Localized repair needing no excavation was first introduced by Link-Pipe inc. in 1978. Link-Pipe Inc. is an engineering and manufacturing company incorporated in 1980 under the laws of Province of Ontario, Canada. The CEO and President of the company is Lembit Maimets, P. Eng. Look what our customers are saying.... Link-Pipe products are used world wide in Asia, Australia, Europe, Middle east and North America. Please state your needs. We will reply promptly.
Specify your needs and get a Quote

  Link-Pipe sewer repair sleeves are designed for a 100 year minimum service life and carry a 10 year Limited Warranty in storm and sanitary sewer environment (Manufacturer specifications apply).  
  Drinking quality water main repair with ultimate pressure not exceeding 300 psi. (20 bar).  
  LINK-PIPE® is engineered for repair of large diameter water mains, sanitary sewers and storm sewers ranging from 36" to 108" (900mm to 2800mm) in diameter.  
  LINK-PIPE® sleeves made of rigid PVC can be adapted to most culvert designs except the box culvert.  
  Pressure Pipes up to 300 psi.  
  Industrial Pipe-Line repair products use special highly corrosion resistant alloys for the core of the repair sleeve.  
  Gas Sealer Sleeve™ provides long-term seal of leaks in 4" to 36" diameter gas mains using mechanically locked sleeves. The sleeves are installed internally covering joints, cracks and areas of corrosion.  
  Water Wells Rehabilitation is a relining method from Link-Pipe. The method was developed to reline and repair casing or screen damages for wells in diameter range from 8" to 30". Any pipe material can be rehabilitated.  
  CIPP Rehabilitation is a relining method from Link-Pipe. The method was developed to solve the problems of CIPP, like infiltration and sturctural reinforcement.  
  INSTA-LINER is a pipe relining method from Link-Pipe. The method was developed for relining sewer from manhole to manhole with stainless steel liner.  

Find detailed information about Link-Pipe products.

Find detailed information about restoration and installation equipment

Find detailed information about....

We are looking for motivated, goal-oriented professionals to join our team.
Link-PIpe training personnel will review the recommended repair methodology, installation procedures and provide hands on training in field condition.
PLEASE READ THIS DOCUMENT CAREFULLY! IT CONTAINS VERY IMPORTANT INFORMATION ABOUT YOUR RIGHTS AND OBLIGATIONS ..
Link-Pipe Inc. is committed to serve it’s customers and meet their needs and expectations in the design, manufacture and supply of reliable and innovative technologies and products for repair of underground infrastructure systems using modern management, engineering and material sciences.

GROUTING SLEEVE™/Sewer Sealer™ Installation Equipment
 

      The basic equipment consist of: 

  • closed circuit television camera (CCTV), 
  • inflatable flow-through sewer plug, 
  • 2 HP air compressor capable of: Air Delivery 5.4/4.3 SCFM @ 40/90 psi pressure, equipped with 20 gallon Air Tank,
  • sufficient length of air-hose to extend from the point of repair to the above-ground air compressor (for less than 100 feet distance the diameter should be at least 1/4 inch, and for distance over 100 feet, 3/8 inch diameter air-hose is recommended), 
  • line pressure regulators and shut off valves, 
  • winch system for transporting and positioning the sleeve at the point of repair, 

To get more information about Link-Pipe inflatable flow-through Sewer Plug click here.

Copyright © Link-Pipe Inc., 1999-2007