|
|
|
Sealing
Infiltration with SewerSealer™ Sleeve
|
|
I-LP
INFILTRATION,
LOW
PRESSURE |
 |
 |
 |
|
Fig. 1 |
Fig.
2 |
Fig.
3 |
|
SewerSealer™
is recommended when long-term reliable seal is desired.
Pipe
condition
(Fig. 1 and 2): Pipe joint is open.
Ground water level below pipe crown.
Misalignment not exceeding 1/8in.(3mm)
Repair
completed (Fig.
3):
From inspection (see time 3:09 at photo 2) to
completed installation of the SewerSealer™ 27
minutes installation time was used (see time 3:36 at
Fig.
3). |
| I-MP
INFILTRATION,
MEDIUM PRESSURE |
 |
 |
|
| Fig.
1 |
Fig.
2 |
|
|
Pipe
condition (Fig. 1):
Infiltrating
hole. Pipe joint is open. Ground water level not
exceeding 11ft. (3.5m) above pipe crown.
Misalignment not exceeding 1/8in.(3mm)
Repair
is progressing (Fig.
2):
Repair completed with SewerSealer™ Sleeve. |
| I-MP
INFILTRATION,
HEAVY
PRESSURE |
 |
 |
 |
| Fig.
1 |
Fig.
2 |
Fig.
3 |
|
Repair
is progressing (Fig.
3): SewerSealer™
installation. |
| In
order to get detailed information about Link-Pipe
SewerSealer™
Sleeve
click here |
|
|
